Spark Plug Cleaner

Spark Plug Cleaner

Features

Fully enclosed fibre glass (FRP) body with "Glossy" finished

Separate plug cleaning chamber consisting of an abrasive system connected to double acting valve for blasting and subsequent cleaning to remove the abrasive and dust

Different sizes of rubber adopters are provided for cleaning plugs of  10mm, 14mm and 18mm sizes

Easy cleaning and replacement of useless abrasive which is stored in a bag

Twin testing chamber connected to the compressed air system for charging the chamber with the necessary control device

Provision for reducing any excess air and releasing pressure in the chamber. The chamber is connected to a special pressure gauge with adjustable, calibrated dial which can be set according to plug gaps determined for different plugs.

Mirror reflector chamber window for visual checking of the spark during the time of testing

The abrasive supplied by us i.e. 500gm will do for approx. 400 plugs. After operation the used abrasive should be let out by unscrewing the stopper at the bottom of the unit.

Technical Specifications

• Input voltage (v): 220
• Electronic vibrator voltage(v): 220/12
• Ignition coil (V/KV): 12/12
• Working pressure (kgf/cm2): 5-12
• Spark plug used (size): M10,M12, M14, M18
• Overall dimensions (LxWxH) (mm): 350x265x280
• Weight (kg): 12